Skip to Content

The 8th National S.T.I Award

The 3rd STI-WEEK Science Cafe Opening

The 3rd STI-WEEK Exhibition

IAEA Director General Yukiya Amano met with H.E.Dr.ING Getahun Mekuria

H.E. Dr. Ing. Getahun Mekuria, FDRE Minister of Science and Technology with Professor Afework Kassu, Deputy Minister.

His Excellency Dr./Eng. Getahun Mekuriya, Minister of Science & Technology, invited Mr Solomon Mulugeta to recognized him as an ambassador of science and technology.

DESIGNED IN ETHIOPIA, Register NOW for the exciting competition. Once you Registred for DESIGNED IN ETHIOPIA, you will become part of a family of innovators ,investors, and entrepreneurs! click here for more info See 


Ethiopian NMI signs the CIPM MRA

Inspired by Ethiopia's goal of achieving middle-income status by 2025and encouraged by its decade-long record of above 10 % annual GDP growth,the National Metrology Institute of Ethiopia (NMIE) andits sister National Quality Infrastructure (NQI) institutions are strongly motivated to be recognized contributors to their country's success story.Joining the international metrology system as an Associate of the CGPM with effect from 1 January 2018, the Ministry of Science and Technology (MOST),responsible for the NQI in Ethiopia, encouraged NMIE to sign the CIPM MRA as soon as possible after that date.The DG of NMIE, Dr Abdu Abagibe, thus signed the document at the BIPM on the 8 January 2018.

Ethiopia adopted the metric system as the nation's legal system of measurement in all commercial and technical activities in 1963 (Proclamation 208 of 1963) and published the applicable Weights and Measures Regulations in 1967. The responsibility for enforcing and administering the Weights and Measures Proclamation and Regulations was given to the Ethiopian Standards Institution (ESI) in 1972. The SI units were adopted through the approval of relevant Ethiopian Standards and the country officially joined the OIML as a full member in 1974 (OIML Bulletin 54, 1974). In the same article in OIML Bulletin 54, the absence of a National Metrology Laboratory was identified as the major problem impeding the further development of a proper Weights and Measures system in Ethiopia. ESI was later changed into the Ethiopian Authority for Standardization (EAS), mandated for promoting standardization, quality control, quality assurance and certification and metrology, as a sole government organ at the national level. EAS was then further transformed in 1998 into the Quality and Standards Authority of Ethiopia (QSAE) and one of its objectives was stated as establishing "a sound national metrology system as a basic structure for economic development." This objective was the foundation for the establishment of laboratories in the QSAE for keeping the national measurement standards and performing calibrations of other standards and equipment against them.

In a major reform of the National Quality Infrastructure, preceded by the publication of a "Strategy for the Implementation of NQI in Ethiopia" in 2009, QSAE was divided in 2011 into different autonomous entities, including the Ethiopian Standards Agency (ESA), the Ethiopian Conformity Assessment Enterprise (ECAE) and the NMIE. A new Institution, the Ethiopian National Accreditation Office was also created in the process and all four core NQI institutions are now located on a joint campus in Addis Ababa, which was previously occupied by QSAE.

Since its formation in 2011 as a separate NQI Institution, the NMIE has consolidated and expanded its offered services and supplemented them with two mobile calibration laboratories. Many of its key calibration services have already been accredited by the German accreditation body DAkkS. NMIE is also currently benefitting from a World Bank loan taken out by the Ethiopian Government for strengthening and further developing its NQI through a project started in July 2017 and scheduled to continue until June 2022.


Message from the Minister Message from the Minister

Message from the Minister

H.E. Dr.-Ing. Getahun Mekuria Kuma has been appointed as the new Minister for Science and Technology beginning the 1st of November 2016. The appointment is part of Prime Minister Hailemariam Desalegn's cabinet reshuffle that came in the first week of November.

H.E. Dr.-Ing. Getahun has served the Ministry for the past two years as State Minister and Director General. Previously, H.E. Dr.-Ing. Getahun worked for the Addis Ababa Institute of Technology of Addis Ababa University in different academic and management capacities. He earned his BSc and MSc degrees in Electrical Engineering from Addis Ababa University. He completed his PhD degree in the same field at the University of Duisburg-Essen, Germany. The appointment of H.E. Dr.-Ing. Getahun as the Minister for Science and Technology is expected to galvanize the transformation process that the Ministry has already embarked on.


Announcement Announcement

የምርምር ገምጋሚ ምሁራን ጥሪ

የሳይንስና ቴክኖሎጂ ሚኒስቴር ከሚያከናዉናቸዉ ዋና ዋና ተግባራት  መካከል ሀገራዊ የምርምር ስርዓትን በመዘርጋት በሀገሪቱ ዉስጥ የሚከናወኑ የምርምምር ስራዎችን በበላይነት መምራት፣ ማስተባባር፣ መደገፍ እና የሚከናወኑ የምርምር ስራዎች ሙያዊ ስነ-ምግባራቸዉን ጠብቀዉ እንዲከናወኑ መከታተል ተጠቃሾች ናቸዉ፡፡

በዚሁ መሰረት የሚደገፉ ሀገራዊ ችግር ፈች፣ ዘርፍ ተሻጋሪና ሲጠናቀቁም ወደ ምርትና አገልግሎት የሚቀየሩ የምርምር ፕሮጀክቶችን በየዘርፉ ብቃት ባላቸዉ ምሁራን የሚያስገምግምና ሙያዊ ስነ-ምግባራቸዉን የሚከታተል ሲሆን እነዚህን የምርምር ፕሮጀክቶችን  የሚገመግሙ ምሁራንንና ተመራማሪዎችን ማሳተፍ ይፈልጋል፡፡

በመሆኑም ከላይ በተጠቀሱ መስኮች መሳተፍ የምትፈልጉ ምሁራንና ተመራማሪዎች በሳይንስና ቴክኖሎጂ ሚኒስቴር ድረ-ገጽ ላይ በተዘረዘሩ የሙያ መስኮች በተቀመጠዉ የመዝገቢያ ቅጽ ላይ መመዝገብ የምትችሉ መሆኑን እየገለጽን ለተጨማሪ ማብራሪያ በስልክ ቁጥር +251118495305 ወይም በኢሜይል አድራሻ መጠየቅ የምትችሉ መሆኑን እንገልጻለን፡፡


በዚህ ሀጋራዊ የመርምር ገምጋሚ ቡድን አባል ለመሆንና በሙያዎ ለማገልግል ፈቃደኛ ከሆኑ እዚህ ያመልክቱ::Click here 


የተሸላሚዎች ስራ

ከምርምርና የፈጠራ አካላት ጋር በጋራ መስራት የምትፈልጉ ወይም የምርምር/የፈጠራ ውጤቶቹ ተጠቃሚ መሆን የምትፈልጉ ከታች በተገለፁት አድራሻዎች በመጠቀም ማግኘት ትችሉ ዘንድ የፈጠራዎቹና የምርምሩ አጭር መግለጫ ከታች እንደሚከተለው ቀርቧል፡፡

ኢመርጂንግ ቴክኖሎጂ ለኢኮኖሚ እድገት

ሀገራት ነባራዊ ሁኔታቸውንና ስነ-ምህዳራዊ ባህሪውን አጥንተው ተስማሚ እና ውጤታማ ቴክኖሎጂዎች ላይ ትኩረት በማድረግ መስራታቸው አለም በምትፈጥንበት እሩጫ ተሳታፊ እንዲሆኑ ያስችላቸዋል፡፡

UN Conference: 3rd International Day of Women and Girls in Science, New York, 8-9/Feb, 

Weekly Visitor Status Weekly Visitor Status

// ]]>